Dispenser, is the glue for two modes and bonding.
As part of bonding because of different design, it is not possible as simple as cutting.
So would most likely use "teaching style" to enter the path.
Dispenser, said that there is glue,
So start sticking point, a plastic speed, speed of execution are key.
The plastic rate should be stable, it will not glue does not.
Speed of execution, as it will not have more glue at the corners.
2011年8月31日 星期三
專用機|CNC|點膠機、3軸
點膠機，就是上膠讓兩片模且黏合。
因為黏合的部份會因為設計不同，所以不可能像切割一樣單純。
所以大多會採用『教導式』來輸入路徑。
點膠機，說了就是有膠，
所以開始黏合點，出膠速度，執行速度，都是重點。
出膠速度要穩定，才不會膠量不一定。
執行速度一樣，才不會在彎角處有較多的膠。
因為黏合的部份會因為設計不同，所以不可能像切割一樣單純。
所以大多會採用『教導式』來輸入路徑。
點膠機，說了就是有膠，
所以開始黏合點，出膠速度，執行速度，都是重點。
出膠速度要穩定，才不會膠量不一定。
執行速度一樣，才不會在彎角處有較多的膠。
2011年8月30日 星期二
CNC|Pipe Bender,2 AXIS,3 AXIS
Pipe Bender
2 axis = feed pipe + pipe bend (X axis)
3-axis = feed pipe + pipe bend (X axis) + pipe bend (Y axis)
Pipe Bender focus:
1 at Pipe Bend at the same time, feed axes need to get forward.
2 If to avoid Pipe Bend, when the outer edge of the rupture, resulting in edge Zhehen.
3 bend starting with the relationship between the drawing.
2 axis = feed pipe + pipe bend (X axis)
3-axis = feed pipe + pipe bend (X axis) + pipe bend (Y axis)
Pipe Bender focus:
1 at Pipe Bend at the same time, feed axes need to get forward.
2 If to avoid Pipe Bend, when the outer edge of the rupture, resulting in edge Zhehen.
3 bend starting with the relationship between the drawing.
訂閱：
文章 (Atom)